POUR-ON:

Kan anvendes til liggebadekar siddebadekar, vaske, brusebunde og i teorien alle andre emner i støbejern, stål, tidligere malede overflader, hård plastik og glasfiber.

OBS. produktet skal kunne løbe ned over hele emnet, dvs. at feks. vaske med indadgående runding, kan pour-on IKKE anvendes.

ROLL-ON:

Kan anvendes til fliser og kakler, liggebadekar, siddebadekar, vaske, brusebunde og i teorien alle andre emner i støbejern, stål, tidligere malede overflader, hård plastik og glasfiber.

OBS: Det anbefales ikke at behandle overfladen, hvis emnet ikke er solidt og kan bøje. Hvis feks et akryl/plast badekars vægge er tynde, eller bunden i en håndvask kan bøjes med håndtryk, anbefaler vi ikke at behandle karret med hårdhærdende produkter, da der er risiko for løsrivelse og revner, hvis emnet er bevægeligt.

1 kit rækker til et standard liggebadekar på ca 170cm og ca 80 cm i højden samt siddebadekar.

Anbefalet ekstra tilbehør til påføring:

Roll-on standard kit:

• Bakke til maling.

• 1 mini Ruller håndtag til 10 cm rulle.

• Nitril handsker (Engangs)
• Malertape (Til afdækning af kanter og afløb.
• Barberblad/hobbykniv (Til afskæring af tape ved bundventil)

Roll-on komplet kit:

• Bakke til maling.

• 1 mini Ruller håndtag til 10 cm rulle.

Pour-on standard kit:

• Bakke til maling.

• 1 mini Ruller håndtag til 10 cm rulle.

Pour-on komplet kit:

• Bakke til maling.

• 1 mini Ruller håndtag til 10 cm rulle.

Fyld afløbshullet med et køkkenrulle. Forsegl afløbet til badekarret tæt med malertape, og skær forsigtigt og præcist malertapen langs med bundventilens kant, således at der ikke kommer emalje på bundventielen ramme eller ned i selve afløbet.

Ja, silikone kan uden problemer påføres når emnet er hærdet. efter hhv. 24 og 48 timer.

After 24 hours, if the temperature in the bathroom is no less than 72ºF, the material becomes sufficiently hard enough to take a bath. If the temperature is 70ºF, then the bathtub can be used in 36 hours after application. 

It is recommended to wait 7 days after the application before placing pots, bottles of shampoo or body wash, or cleaning pets in the bathtub. Usage of colorants, such as hair color, or various products with colorants which are used for taking a bath can be used 14 days after Ekopel application.

We recommend Scrubbing Bubbles and Tilex (WITHOUT BLEACH) to our customers. For in depth cleaning, a Mr. Clean Magic Eraser works well. Any acrylic-safe, nonabrasive cleaner is the best option. 

For long-term care, quarterly polishing with our Bathtub Wax is highly encouraged. The helps to keep the tub easy to clean and prevents the need for hard scrubbing, which can ultimately wear down the shine over time. 

If you have Ekopel in an unwanted area (like flooring) simply heat up the area with a heat gun or hair dryer, and then scrape off what you can. After, use acetone to aid in further removal. If it’s on your skin acetone & soap and water can be used. 

The material has been tested by the German Institute ISEGA and complies with the standards DIN EN 71-3 (Safe for children) and it is harmless when it comes into contact with skin. During the mixing and application of the material, we recommend using standard protection equipment for skin, eyes, and respiratory system.

The shelf life is 2 years. Store the product in a dry place, in a firmly closed container, at the temperature 50 to 70ºF. If the product gets frozen, it must be stored in a warm place for 24 hours before it can be used.

Pour On Ekopel 2k is a thick, glossy, shiny, smooth finish. Roll-On Ekopel is just as durable, glossy, and shiny with a little more orange peel look to it.

While Ekopel can handle some heat, Ekopel can be burned and is not heat resistant. You will want to be careful with hair straighteners, curling irons, etc. as they can burn and melt the material.

Ekopel is a very thick product. It is one of the things that makes it so durable. Roll-On Ekopel dries about 10x thicker than other painted or sprayed materials and Pour On Ekopel is about 20x thicker

No! Once it is mixed it smells like a spray cleaner; very light, not intense, and quickly disappears. It is not absorbed by clothes.

The coating can last for 15-20 years or more if all recommendations for applying the material are followed in conjunction with proper and careful maintenance. 

If for any reason you must use a heat gun, the recommended temp is between 200-250 degrees . Keep in mind you can burn the material so work cautiously.

Masking tape, which is glued to the wall of the bathtub and located above the coating, should be removed immediately after applying the material. The masking tape, which protects the bathtub’s “front apron” as well as tape covering the drain should be removed after the material stops dripping, which is about 5-6 hours after application.

We do not recommend opening the window because dust, dirt, and insects can get into the surface that has not yet dried up.

If it is possible to disconnect the bath drain, we recommend doing it. It may be possible to disconnect the plastic pipe independently through the access panel. If you cannot remove the bath drain, then close the drain hole.

The room should be at least 72ºF one day before and during work. No warmer than 78ºF.

Remove all items from the bathroom (towels, bathrobes, personal care products) into a closet and vacuum thoroughly the walls, ceiling, shelves and other places where the dust could be. This will help to avoid dust getting into the coating. Close the window so that insects would not fall on the coating as well. Prevent animals from entering into bathroom during work and after, while the material is getting dry. Maintain the temperature in the bathroom no less then + 22ºС for one day before the work, at the time of the work, and within 2 days after applying the material.

Limescale must be removed. To do so, a cleaner from the kit can be used. If the cleaner does not completely remove the limescale, the remains should be cleaned by using sandpaper.

Rust must be removed. Use sandpaper and cleaner from the kit.

Silicone must be removed completely. If the material is applied on a surface where silicone is not removed, the material may peel off.

If your bathtub was covered with paint it is necessary to remove the old paint. Paint which peels off from bathtub should be removed in order for the new layer to have a good adhesion and does not peel off in the future. To remove the old paint heat it then take off old paint by spatula.

Roll-on tørretid til anvendelse: 24 timer ved stuetemperatur.

Pour-on tørretid til anvendelse: 48 timer ved stuetemperatur.

OBS: 

Vi anbefaler at man ikke rengører emnet i de første 7 dage, da produktet først er 100% hærdet derefter.

Aftør blot med en mokrofiberklud efter brug.